Info
apply moments, axial forces and shears and then determine the section properties,
stresses and strains.
SAM-LEAP5's beam design modules allow you to define and design steel concrete
composite beams, precast prestressed beams, reinforced concrete beams
and post-tensioned concrete beams.
SAM-LEAP5's analysis modules model a wide range of bridge structures from line beams,
through offset grillages to plate finite element models.
Integration with the section and beam modules leads to a very rapid design cycle
2) Install LEAP5 Classic 6.2.4
3) Install update file then copy crack files
بازگشت به صفحه اصلی وبلاگ مهندسی عمران راه و ساختمان(مهندس حسن فراهانی)
برچسبها: دانلود, نرم افزار, طراحی پل, Sam Leap 5 Bridge Design
دانلود نرم افزار طراحی پل - PGSuper™2.2.3
![[تصویر: pgsuper-thumb.jpg]](https://www.cesdb.com/thumbs/pgsuper-thumb.jpg)
![[تصویر: FullScreen.jpg]](http://www.pgsuper.com/images/FullScreen.jpg)
PGSuper™ Overview PGSuper™ is our Precast-Prestressed Girder design and analysis software. This software has been developed by the Bridge Design Office's of the Washington and Texas Departments of Transportation for the Alternate Route Project. PGSuper™ can be used to design, check, and load rate precast-prestressed girder bridges in accordance with the AASHTO LRFD Bridge Design Specification, WSDOT criteria, or TxDOT criteria. The flexural design feature computes the number and configuration of prestressing strands and the minimum required concrete release strength. The shear design feature determines the number, size, and spacing of transverse reinforcement for vertical shear, horizontal shear, bursting, and strand confinement. Specification checking evaluates girders for compliance with strength, service, and detailing criteria. Girders are evaluated for stresses and stability during handling and transportation. Temporary prestressing to control camber, improve stability, and reduce concrete release strengths may also be input. The capabilities and constraints of local fabricators have been accounted for in this software product. PGSuper™ has been designed to allow for future expansion and updating as design criteria and user expectations change.
PGSuper™ is licensed with the Alternate Route Open Source License.
Free online PGSuper training and P2P email support is available at PGSuper.com.
[*]Current Version: 2.5.3 January 23, 2012
برای دانلود اینجا کلیک کنید...
ftp://ftp.wsdot.wa.gov/public/Bridge/Software/Files/PGSuper_2.5.3/PGSuper_2.5.3.msi
بازگشت به صفحه اصلی وبلاگ مهندسی عمران راه و ساختمان(مهندس حسن فراهانی)
برچسبها: نرم افزار, طراحی پل, PGSuper™2, 2
دانلود نرم افزار - MIDAS-GEN Educational Version 3.5
Size: 9 MB
midas Gen is a general-purpose structural analysis and optimal design system. The intuitive user Interface, contemporary computer graphics and powerful solver are some of the highlights of midas Gen. The user-oriented input/output features and a wide range of analysis capabilities enable practicing engineers and researchers to readily perform structural analysis and design for even complex and large structures. midas Gen utilizes the latest multi-frontal solver and analysis algorithms, which instantly generate accurate and practical analysis results. In addition, midas Gen provides design capabilities using various international standards producing optimal design solutions.
در ادامه مطلب
بازگشت به صفحه اصلی وبلاگ مهندسی عمران راه و ساختمان(مهندس حسن فراهانی)
ادامه مطلب...
فايل اكسل جهت برآورد پايه پل + نمونه برآورد كوله پل بزرگ
نقل قول :
فايل اكسل جهت برآورد ستون هاي يك پل به همراه شمع را تهيه كرده ام.خوشحال مي شم در ضمن استفاده از آن نواقص كار را متذكر شويد .
در فرمت فشرده (rar)
لینک دانلود از ایران سازه
فايل اكسل جهت برآورد پايه پل
نمونه برآورد كوله پل بزرگ
نمونه کارآموزی
بازگشت به صفحه اصلی وبلاگ مهندسی عمران راه و ساختمان(مهندس حسن فراهانی)
نرم افزار تحت اکسل طراحی پل + فیلم طراحی دال با Sap
نرم افزار تحت اکسل طراحی پل
(RCC11 Element Design)
ELEMENT DESIGN to BS 8110:1997
(به زبان عربی)
چگونگی تعریف تکیه گاه ها و ...
(به زبان عربی)
بازگشت به صفحه اصلی وبلاگ مهندسی عمران راه و ساختمان(مهندس حسن فراهانی)
برچسبها: نرم افزار, تحت اکسل, طراحی پل, فیلم
ادامه مطلب...
Imbsen Winfad v5.0
در ادامه مطلب
بازگشت به صفحه اصلی وبلاگ مهندسی عمران راه و ساختمان(مهندس فراهانی)
ادامه مطلب...
MIDAS SET V3.3.1 - WITHOUT CRACK
MIDAS SET V3.3.1(WITHOUT CRACK)
SORRY FOR THAT, IF SOMEONE HAVE CRACK PLEASE SHARE IT.
THANK IN ADVANCE.
MIDAS SET V3.2.1 (WITH CRACK)
در ادامه مطلب
بازگشت به صفحه اصلی وبلاگ مهندسی عمران راه و ساختمان(مهندس فراهانی)
ادامه مطلب...
Midas Gen 2011 v2.1 - 30 days TRIAL
Integrated Analysis and Design System for Buildings and General Structures.
For more information and requesting 30 days trial key
بازگشت به صفحه اصلی وبلاگ مهندسی عمران راه و ساختمان(مهندس فراهانی)
ادامه مطلب...
LimitState RING v3.0.b.11817
Size: 76.3 MB
LimitState:RING 3.0 is the latest version of the highly successful RING software for the analysis of masonry arch bridges.
Modern, intuitive user interface
Multi-ring, multi-span analysis (no need to balance thrusts)
Use a wide range of built-in and user-defined arch profiles
Include local defects such as mortar loss and weak masonry
Undertake support settlement analyses
View moment, shear and normal force diagrams
Allocate separate properties to nearsurface and deep fill
Model reinforcement
http://www.filesonic.com/file/1500758791/LimitState.RING.v3.0.b.11817-RECOiL_share4progressivenes.softarchive.net.rar
http://www.fileserve.com/file/QpsQWgp/LimitState.RING.v3.0.b.11817-RECOiL_share4progressivenes.softarchive.net.rar
http://www.wupload.com/file/64075653/LimitState.RING.v3.0.b.11817-RECOiL_share4progressivenes.softarchive.net.rar
دانلود نرم افزارهای مرتبط با طراحی پل ها
نرم افزار تحت اکسل طراحی دال به همراه راهنما (GRIDFORM)
GRIDFORM™ Design Guide
The
GRIDFORM™ Design Guide is provided as a service to structural engineers
to determine if GRIDFORM™ can be used as an alternative to steel rebar
as the internal reinforcement system for reinforced concrete bridge
decks. The use of GRIDFORM™ by an engineering firm or installation
contractor is governed by Strongwell's Terms and Conditions of Strongwell Web Site Use. Please review these terms and conditions prior to using the GRIDFORM™ Design Guide.
The GRIDFORM™ Design Guide requires Microsoft® Excel® version 2003 or 2007.
می توانید برای دریافت اطلاعات بیشتر و دانلود مطالب از منبع استفاده نمایید یا به ادامه مطلب رجوع نمایید....
ادامه مطلب...
AISC/ASCE STUDENT STEEL BRIDGE COMPETITION 2011
USING STAAD.Pro V8i
TYPE : PDF
BY: BENTLY (RAVINDRA OZARKER, P.ENG. )
PAGE: 156 PAGEs
به حجم 8.6 مگابايت
در فرمت pdf
فیلم آموزشی نرم افزار HEC RAS
نرم افزار The Hydrologic Engineering Center River Analysis System یا HEC-RAS توسط مهندسان ارتش ایالات متحده امریکا ساخته شد و به رایگان در دسترس عموم قرار گرفت .
دیگر ویژگی ها :
آنالیز جریان ماندگار و ناماندگار
طراحی کالورت
طراحی پل
طراحی سازه های جانبی (Lateral Structures )
طراحی سریز ها
و ...
در مورد فیلم آموزشی :
مدت زمان : 11 دقیقه
حجم تقریبی : 7 مگابایت
لینک اتصال دانلود نرم افزار کلیک کنید...
Imbsen Winbds
WinBDS analyzes or designs orthogonal bridge frames and is applicable to the majority of concrete bridges being designed today.
CROSS SECTIONS may by specified by using a predefined, standard box
girder superstructure shape or by adding or subtracting geometrical
parts using predefined part codes.
LIVE LOADS can be automatically generated for the AASHTO HS20-44 and the
California P13 truck by simply giving the number of live loads lanes
may be applied to the structure by describing the axle loads, distance
between axles and number of live load lanes. Uniform lane loads can be
defined with moment and shear riders. Other automatically generated live
loads include the Cooper Loading and a user defined vehicle of up to 97
axles.
PRESTRESSED CONCRETE analysis and design capabilities include:
Continuous prestress, Simple span prestress, Segmental prestress, 100
prestress cable paths per frame, 3D cable friction losses, Primary and
Secondary effects, Cross-section analysis, Ultimate capacity check,
AASHTO shear requirements, Tendon elongations, and calculation of AASHTO
long-term losses.
OUTPUT results are organized in the same order as the input data. All
input data is echoed in the output reports. Output reports include
section properties, dead load and additional fixed loads results, live
load force envelopes, prestress results including required P-Jack, mild
steel requirements, and shear design stirrup requirements. Additional
reports are generated for the Rating Subsystem and Prestresed Precast
Girder Subsystem.
GRAPHICAL DISPLAY of moment and shear envelopes are available after an
analysis has been performed. Additional plots are available for
deflections, top and bottom fiber stresses, prestress force, prestress
cable path and influence lines. These plots can be displayed for all
spans in the bridge or for an individual span or for any sequential list
of spans. Where applicable, the plots include the different trials that
are available, such as: dead load, added dead load, live load no. 1
(both negative and positive envelopes), prestress, etc. These loads can
be plotted individually or combined into one load case
http://www.mediafire.com/file/ubsz00w65muiunx/winseisab_5_0_7.rar
http://www.duckload.com/download/3039450/WinSEISAB_5.0.7.rar
http://www.filesonic.com/file/101401562/winseisab_5_0_7.rar
http://www.fileserve.com/file/T7QjCjq/winseisab_5_0_7.rar
http://www.shragle.com/files/39fc778a/winseisab_5_0_7.rar
http://uploading.com/files/fb4e66a1/WinSEISAB_5.0.7.rar/
http://ifile.it/rv9blx4/winseisab_5_0_7.rar
4shared|depostefiles|hotfile|rapidshare|filefactory|uploaded.to:
http://www.interupload.com/files/1O12UDQY/winseisab_5_0_7.rar_links
WinSEISAB v5.0.7 - Seismic Analysis of Bridges
Program Overview
WinSEISAB (Windows SEISmic Analysis of Bridges) is a computer program
specifically developed for the seismic analysis of bridges. The overall
objectives in developing WinSEISAB were to provide the practicing bridge
engineer with a usable design tool and a vehicle for implementing the
latest seismic design methodologies into the bridge engineering
profession.
WinSEISAB contains the Uniform Load (AASHTO Procedure 1), the Single
Mode Spectral Analysis (AASHTO Procedure 2) and Multimode, i.e.,
response spectrum, Spectral Analysis (AASHTO Procedure 3) methods
included in the current AASHTO Standard Specifications for Highway
Bridges, Division IA [1], which adopted the “Guide Specifications for
Seismic Design of Highway Bridges” [10] in 1990. The Guide
Specifications are based on the ATC report: “Seismic Design Guidelines
for Highway Bridges” [2]. Consequently, the AASHTO response spectra used
in WinSEISAB correspond to those that were previously identified as
‘ATC-6.’
WinSEISAB can be used to analyze simply supported or continuous deck
girder-type bridges with no practical limitation on the number of spans
or the number of columns at a bent. In addition, earthquake restrainer
units may be placed between adjacent structural segments. Horizontal
alignments composed of a combination of tangent and curved segments are
easily described using alignment data taken directly from roadway plans.
Connections between the superstructure and the substructure and between
adjacent superstructure segments at span hinges can be specified with
either a keyword force release or by using bearing elements on a
point-by-point basis. The flexibility of the soil and foundations at the
abutments and column bottoms is easily included using stiffness
coefficients or individual piles grouped into pile footings.
WinSEISAB has generating capabilities that will, with a minimum amount
of input data, automatically build a model consistent with the modeling
techniques currently being used to conduct dynamic analyses. Seismic
loadings in the form of acceleration response spectra are stored within
WinSEISAB and may be easily referenced by the user, or a site-specific
spectrum can be utilized. WinSEISAB can perform a static analysis in
which dead load forces are generated using structure mass, but WinSEISAB
does not perform a combination of dead load and seismic forces
http://www.mediafire.com/file/ubsz00w65muiunx/winseisab_5_0_7.rar
http://www.duckload.com/download/3039450/WinSEISAB_5.0.7.rar
http://www.filesonic.com/file/101401562/winseisab_5_0_7.rar
http://www.fileserve.com/file/T7QjCjq/winseisab_5_0_7.rar
http://www.shragle.com/files/39fc778a/winseisab_5_0_7.rar
http://uploading.com/files/fb4e66a1/WinSEISAB_5.0.7.rar/
http://ifile.it/rv9blx4/winseisab_5_0_7.rar
4shared|depostefiles|hotfile|rapidshare|filefactory|uploaded.to:
http://www.interupload.com/files/1O12UDQY/winseisab_5_0_7.rar_links
طراحی انواع کالورت با برنامه ی HY-8 + فیلم آموزش فارسی این نرم افزار
برنامه ی HY-8 ساده ترین برنامه رایگانی است که برای آنالیز کالورت ها با اشکال گوناگون کاربرد دارد .
این برنامه مطابق با آیین نامه FHWA ساخته شده است.
لینک دانلود برنامه باحجم 32 مگابایت از سایت اصلی :
http://www.fhwa.dot.gov/engineering/hydraulics/software/hy8/agree72.cfm
در فیلم آموزشی تهیه شده ، طراحی کالورت دایره ای برای مقطع یک جاده نمایش داده می شود
لینک دانلود فیلم آموزشی با حجم 7 مگابایت از سرور پرشین گیگ :
http://seewill.persiangig.com/video/HY8CulvertAnalysis.zip
دوستانی که طرز استفاده نمودارهای این آیین نامه یا چگونگی حل مسائل کالورت را بر طبق آن را نمیدانند
میتوانند PDF زیر را مشاهده کنند . این PDF شامل روش حل دستی همراه با مثالهای متعدد کالورت بر
طبق آیین نامه FHWA می باشد .
حجم فايل: 552.79 کیلوبایت
http://www.4shared.com/document/yUAbp_OO/culvert.html
با تشكر از سايت سي ويل
نرم افزار آنالیز و طراحی لرزه ای انواع پل های ساده و پیچیده
Csi Bridge V15
SAP2000/Bridge Superstructure Design
منوال:
Three new manuals are available as .PDF files and bound into a single printed volume: Introduction to SAP2000/Bridge, SAP2000/Bridge Seismic Design, and SAP2000/Bridge Superstructure Design
*Introduction to CSiBridge [PDF]
*Golden Gate Bridge Animation [mov]
*Moving Vehicles [avi]
*Moving Vehicles and Deflections [avi]
*Superstructure Design Manual [pdf]
* Seismic Analysis & Design [pdf]:1
http://www.csiberkeley.com/CSiBridge_news/v15/animations/GGB_Movie_Hi_Res.mov
http://www.csiberkeley.com/CSiBridge_news/v15/animations/f%28good%29-2.avi
http://www.csiberkeley.com/CSiBridge_news/v15/animations/GoodTruck.avi
http://www.csiberkeley.com/CSiBridge_news/v15/images/BridgeSuperstructureDesign.pdf
http://www.csiberkeley.com/CSiBridge_news/v15/images/BridgeSeismicDesign.pdf
http://www.mediafire.com/?fgyq8drzgdawo
Size: 523,79 MB
miror links
megaupload
http://www.megaupload.com/?d=C0B1UN5S
depositefiles
http://depositfiles.com/en/files/ftqndg095
direct from multiupload
http://www.multiupload.com/ZEGU3C5FLS
برنامه تحت اكسل طراحي و بارگذاري تير پل هاي راه
به حجم 171 كيلوبايت
در فرمت فشرده Rar
Download spreadsheet in zip file LneBem.zip
(بعد از دانلود بايستي Option ---> Enable را فعل نماييد...)
An Excel spread sheet using moment distribution to carry out a line beam analysis can be downloaded by
An Excel spread sheet using co-ordinate geometry can be downloaded by
به حجم 20 كيلوبايت
در فرمت فشرده Rar
Download spreadsheet in zip file Xsect.zipسايت عمراني David Childs
David Childs is a civil engineering consultant specialising in bridge design and bridge assessment
مشاور مهندسی عمران و متخصص در طراحی و ارزیابی پل
PGSuper analyzes and designs precast girders for all critical stages: casting, lifting, hauling, erection, service, and ultimate conditions. The automated designer determines the prestressing, concrete strength, lifting, transportation, and slab haunch requirements.
PGSuper has the most extensive and detailed reports available. Every detail of every calculation can be reviewed. You'll never have to guess what the software is doing.
Features
Just because it's free, doesn't mean it's not the most capable precast girder bridge design program out there!!
Design Specifications:
♦ AASHTO LRFD 1998-2008
♦ Checks All Appropriate Specifications
♦ Highly Configurable
♦ User Input Stress Limits
♦ Computed and User-Input Distribution Factors
♦ User-Input LRFD Load Modifiers
♦ Five Methods of Loss Calculations
Analysis:
♦ Simple or Continuous Span Structures
♦ Highway Bridge Structures
♦ Pedestrian/Bicycle only Bridge Structures
♦ Integral Pier Connections
♦ Multiple Stages
♦ Stress Checks For All Stages/Limit States
♦ User-Input Time Parameters For Creep
♦ Moment Capacity From Strain Compatibility
♦ All LRFD Shear Capacity Methods supported
♦ Modulus of Rupture For Cracking Moment
Girder Sections And Reinforcement:
♦ 11 Parametric Girder Section Shapes
♦ All Popular Prestressing Strand Types
♦ Harped And Debonded Strands
♦ Pre-or-Post Tensioned Temporary Strands For Lifting and Hauling
Units:
♦ Hot Switchable: US or SI
System:
♦ Windows NT/2000/XP/Vista
♦ No Copy Protection
Automated Design:
♦ Harped and Straight Strand Placement
♦ Debonding Design
♦ Concrete Strength (Release And Final)
♦ Lifting And Hauling Points
♦ Required Slab Haunch
♦ Stirrup Placement
Loading:
♦ HL-93 Live Load
♦ User-Defined Live Load
♦ All Dead Loads Automatically Computed
Complex Bridge Geometry:
♦ Modeling Of Full Superstructure
♦ Multiple girder types in a bridge
♦ Splayed and variable girder spacing
♦ Multiple Spans
♦ Multi-Segment Horiz. & Vert. Curves
♦ Horizontal Spiral Curves
♦ Superelevation Segments
♦ Crown Point Offset
Reporting:
♦ Highly-Detailed Reports - Don’t Guess What the Program Did—See It!
♦ Many report types, user-configurable
♦ Html Output, Highly Graphical
♦ Capacity And Demand Graphs
♦ Navigable Table of Contents
♦ Text Searching
Extensive Library System:
♦ Define Girders, Materials, Barriers, Project Criteria, and more
♦ Internet-based update and syncronization
And Much More….
PGSuper was designed by Bridge Engineers for use in high-production design environments
